Visit Lysaght.com

Other Lysaght Sites

Description

A roofing and walling profile with a strong rib making a bold statement rising from flat pans with longitudinal fluting offering long, straight lines for a crisp and clean finish.

  • Concealed fixed offering supreme watertightness
  • Can be used with LOK-KLIP® end and expansion joint system
  • Nominal cover width: 700mm
  • Minimum roof slope: 1° (0.48 BMT), 2° (0.42mm BMT)

Technical Specifications

Schematic

Lengths

Sheets are supplied custom cut to length. Minimum and maximum lengths apply. Please contact your nearest LYSAGHT® office for your region for more information.

Tolerance

Length: +0 mm, -15 mm
Width: +4 mm, -4 mm

Material Specification

Next generation ZINCALUME® aluminium/zinc/magnesium alloy coated steel complies with AS1397:2011 G550, AM125 (550 MPa minimum yield stress, 125 g/m2 minimum coating mass).

COLORBOND® steel is prepainted steel for exterior roofing and walling. It is the most widely used. The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/zinc alloy-coated steel complying with AS 1397:2011. Minimum yield strengths are G550 (550MPa), or G300 (300MPa) depending on profile. Minimum coating mass is AM100 (100g/m2).

COLORBOND® Metallic steel is prepainted steel for superior aesthetic qualities displaying a metallic sheen.

COLORBOND® Ultra steel is prepainted steel for severe coastal or industrial environments (generally within about 100-200 metres of the source). The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/ zinc alloy-coated steel complying with AS 1397:2011. Minimum coating mass is AM150 (150g/m2).

SuperDura™ Stainless steel is pre-painted steel and is used for severe and coastal environments. The painting complies with AS/NZS 2728:2013 and the steel base is a stainless steel complying with AISI/ASTM Type 430; UNS No. S43000.

Masses

Finish BMT Mass
(mm) kg/m kg/m2 m2/t
ZINCALUME® 0.42 3.26 4.66 215
COLORBOND® 0.42 3.32 4.74 211
ZINCALUME® 0.48 3.70 5.29 189
COLORBOND® 0.48 3.76 5.37 186

Span Table

The maximum recommended support spacings are based on testing in accordance with AS1562.1-1992, AS4040.0-1992 and AS4040.1-1992.

Roof spans consider both resistance to wind pressure and light roof traffic (traffic arising from incidental maintenance).

Wall spans consider resistance to wind pressure only.

For further details Download LYSAGHT KLIP-LOK CLASSIC® 700 Design and Installation Guide.

Maximum Support Spacings (mm)
Types of Span BMT (mm)
0.42 0.48 0.42 0.48
Roofs* Region A Region B
Single Span 1600 2000 1600 2000
End Span 2000 2600 1800 2100
Internal Span 2700 3000# 2600 3000#
Unstiffened Eaves Overhang 200 250 200 250
Stiffened Eaves Overhang 500 600 500 600
Walls** Region A Region B
Single Span 2150 2550 2000 2450
End Span 2900 3150 2300 2550
Internal Span 3000# 3000# 3000# 3000#
Overhang 300 400 300 400

Above table is based on supports of 1mm BMT.
# Spans in excess of 3000mm may be available subject to enquiry.
* For roofs: the data are based on foot-traffic loading.
** For walls: the data are based on pressures.

Capacity & Load Tables

The limit state wind pressure capacity table can be viewed in the LYSAGHT KLIP-LOK CLASSIC® 700 brochure. Download LYSAGHT KLIP-LOK CLASSIC® 700 Design and Installation Guide.

This information is suitable for use only in areas where a tropical cyclone is unlikely to occur as defined in AS1170.2-2002.

For correct specification and installation of Lysaght roofing and walling products in cyclonic areas, please download LYSAGHT® Cyclonic Area Design Manual.

NCC of Australia Compliance

LYSAGHT® products comply with the National Construction Code of Australia (NCC).

Downloads

Brochures & Catalogues

LYSAGHT® Residential Walling Brochure PDF(5.25 MB). Last updated 22 Nov 2023

User Guides & Manuals

Availability

New South Wales & ACT
Not Available
Northern Territory
Not Available
Queensland
Not Available
South Australia
Available
Tasmania
Not Available
Victoria
Not Available
Available
Filled
Available
Outlined
Not Available

Colour Range

STANDARD COLOUR RANGE

  1. Basalt®
  2. Bluegum®
  3. Classic Cream™
  4. Cottage Green®
  5. Deep Ocean®
  6. Dover White™
  7. Dune®
  8. Evening Haze®
  9. Gully®
  10. Ironstone®
  11. Jasper®
  12. Manor Red®
  13. Monument®
  14. Night Sky®
  15. Pale Eucalypt®
  16. Paperbark®
  17. Shale Grey™
  18. Southerly®
  19. Surfmist®
  20. Wallaby®
  21. Windspray®
  22. Woodland Grey®

ULTRA COLOUR RANGE

  1. Dune®
  2. Monument®
  3. Surfmist®
  4. Wallaby®
  5. Windspray®
  6. Woodland Grey®

MATT COLOUR RANGE

  1. Basalt®
  2. Bluegum®
  3. Dune®
  4. Monument®
  5. Shale Grey™
  6. Surfmist®

METALLIC COLOUR RANGE

  1. Aries™
  2. Astro™
  3. Celestian™
  4. Cosmic™
  5. Galactic™
  6. Rhea™

Unpainted Steel Range

  1. ZINCALUME® steel

COLORBOND® steel Studio Library

COLORBOND® steel Studio enables you to browse over 200 COLORBOND® steel colours. Search by RGB or HEX colour values or DULUX or RAL colour names to return the closest match from over 200 available colours.

The COLORBOND® steel colour swatches shown have been reproduced to represent actual product colours and finish as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions and limitations of the printing process may affect colour tones and finish. All colours & finishes may not be available in all regions or for all profiles. To determine the most suitable material for your project, please contact your supplier or steel.com.au/Colorbond.

Pricing

Pricing for all our products varies based on availability and quantity.

Questions?

Phone (Mon-Fri, 9AM-5PM AEST/AEDT):

1800 641 417

100 Years Celebration

LYSAGHT® products have been made in Australia for 100 years.