PRODUCT INFORMATION TOO TECHNICAL?Visit Lysaght.com
Description
With a semi-open design of horizontal slats, LYSAGHT LOUVRESCREEN® provides privacy whilst also allowing light and airflow into your property.
- Features angled horizontal slats made from COLORBOND® steel
- Available in 1500mm & 1800mm heights
- Rot and termite resistant whilst adding security and privacy
Technical Specifications
Schematic
LOUVRESCREEN® Slat Infill
LYSAGHT® Fence Post
LYSAGHT® Universal Fence Rail
Material Specification
COLORBOND® pre-painted steel complying with AS/NZS 2728:2007. Next generation ZINCALUME® aluminium / zinc / magnesium alloy coated steel complying with AS1397-2011 G550, AM125 (550 MPa minimum yield stress, 125 g/m2 minimum coating mass).
The fence panel base metal thickness is 0.55mm.
Sizes
The nominal heights of fences are 1500mm and 1800mm from top rail to bottom rail. The bottom rail should be nominally 50mm above ground level.
Standard panel widths are 1575mm from post to post.
Suitability
CUSTOMSCREEN® can be installed in all regions of Australia except for the tropical cyclonic regions defined in AS/NZS 1170.2.2002 Structural Design Loads, Part 2: Wind Loads (See map Figure 4.2). Please refer to our cyclonic fencing range for use in these areas.
NCC of Australia Compliance
LYSAGHT® products comply with the National Construction Code of Australia (NCC).
Downloads
Brochures & Catalogues
LYSAGHT SLATSCREEN® and LYSAGHT LOUVRESCREEN™ Brochure PDF(2.18 MB). Last updated 9 Feb 2023
LYSAGHT® Fencing Product Performance Warranty PDF(780.83 KB). Last updated 9 Feb 2023
User Guides & Manuals
LYSAGHT SLATSCREEN® and LYSAGHT LOUVRESCREEN™ Installation Guide PDF(1.9 MB). Last updated 15 Feb 2023
Availability
- New South Wales & ACT
- Available
- Northern Territory
- Not Available
- Queensland
- Available
- South Australia
- Available
- Tasmania
- Available
- Victoria
- Available
- Western Australia
- Not Available
- Filled
- Available
- Outlined
- Not Available
Colour Range
STANDARD FENCING COLOUR RANGE
-
Domain®
-
Monument®
-
Paperbark®
-
Surfmist®
-
Woodland Grey®
COLORBOND® steel Studio Library
COLORBOND® steel Studio enables you to browse over 200 COLORBOND® steel colours. Search by RGB or HEX colour values or DULUX or RAL colour names to return the closest match from over 200 available colours.
The COLORBOND® steel colour swatches shown have been reproduced to represent actual product colours and finish as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions and limitations of the printing process may affect colour tones and finish. All colours & finishes may not be available in all regions or for all profiles. To determine the most suitable material for your project, please contact your supplier or steel.com.au/Colorbond.
Pricing
Pricing for all our products varies based on availability and quantity.
Questions?
Phone (Mon-Fri, 9AM-5PM AEST/AEDT):
1800 641 417
100 Years Celebration
LYSAGHT® products have been made in Australia for 100 years.