Description

A safe, stable, slip resistant walkway system for incidental access to roof-mounted equipment and services. It is laid on top of steel roofing with brackets designed for application to various roof cladding profiles.

  • Can be laid parallel or 90 degrees to the ribs of roofing sheets
  • Simple to install
  • Corrosion resistant
  • Anti-skid, self-draining surface

    Technical Specifications

    Schematic


    Lengths

    Stock lengths: 3018mm and 6075mm; +0mm, -6mm

    Tolerance

    Depth: +1mm, -1mm
    Width: +0mm, -2mm

    Material Specification

    The planks of ROOFTRAK® are made from galvanised BlueScope Lysaght ZINCFORM® steel conforming to AS1397-2001, grade G300, Z450 (300MPa minimum yield stress, 450g/m² minimum coating mass), with a base metal thickness of 1.2 mm (2.0 mm is subject to enquiry).

    LYSAGHT ROOFTRAK® walkways may be used in cyclonic and non-cyclonic areas. For use in cyclonic areas the roof cladding must also be fixed in accordance with our Cyclonic area design manual for steel roofing and walling.

    Australian Standard 1657-1992 allows a maximum slope of 20 degrees along cleated or grated walkways. For ROOFTRAK® installed at 90 degrees to the ribs, the side slope (pitch of roof) should not exceed 5 degrees.

    The roof supporting LYSAGHT ROOFTRAK® must be verified to have sufficient capacity to withstand all the additional loads.

    For LYSAGHT ROOFTRAK® 450 applications, approval from regulatory authorities must be obtained as it is narrower than the minimum provided for in AS 1657-1992.

    Alternative Claddings

    LYSAGHT ROOFTRAK® can be used with a range of claddings. When used with LYSAGHT KLIP-LOK 700 HI-STRENGTH® and oriented in the same direction as the cladding, an additional stiffening plate must be included.

    Configurations

    ROOFTRAK® is supplied in kits that include components and fixings. The basic ROOFTRAK® "plank" is 224mm wide. The ROOFTRAK® 450 system uses two planks (total 450mm wide); ROOFTRAK® 675 uses three planks (total 675mm wide). For further details of the kits available, Download LYSAGHT ROOFTRAK® Roof Walkway System (1701 KB)

    Made in Australia

    All Lysaght products are proudly made in Australia from 100% Australian steel.

    Downloads

    Technical Specifications & Manuals

    LYSAGHT ROOFTRAK® User Guide (1.7 MB). Last updated 22 Mar 2016

    Availability

    New South Wales & ACT
    Available
    Northern Territory
    Not Available
    Queensland
    Available
    South Australia
    Available
    Tasmania
    Available
    Victoria
    Available
    Not Available
    Filled
    Available
    Outlined
    Not Available

    Pricing

    Pricing for all our products varies based on availability and quantity.

    Questions?

    Phone (Mon-Fri, 9AM-5PM):

    1800 641 417

    Email: steeldirect@bluescopesteel.com