Visit Lysaght.com

Other Lysaght Sites

Description

Neighbour friendly with a similar attractive appearance on both sides, this versatile steel boundary fence system offers clean, attractive lines with a subtle textured finish that’ll look at home in any setting.

  • Features a unique panel made from COLORBOND® steel with a similar appearance on both sides
  • Available in 1500mm, 1800mm & 2100mm heights
  • Rot and termite resistant whilst adding security and privacy
  • Customise your SMARTASCREEN® boundary fence with a range of Plus Options including Lattice, Slats and Gates

Technical Specifications

Schematic

SMARTASCREEN® Infill Sheet

LYSAGHT® Fence Post

LYSAGHT® Universal Fence Rail

Material Specification

COLORBOND® pre-painted steel complying with AS/NZS 2728: 2007. Next generation ZINCALUME® aluminium / zinc / magnesium alloy coated steel complying with AS1397-2011 G550, AM125 (550 MPa minimum yield stress, 125 g/m2 minimum coating mass).

The fence panel base metal thickness is 0.35mm.

Sizes

The nominal heights of fences are 1500mm, 1800mm and 2100mm from top rail to bottom rail. The bottom rail should be nominally 50mm above ground level. Standard panel widths are 3100mm from post-to-post for a 4 infill sheet panel design. Some wind regions and terrain categories may require a 3 or 2 infill sheet design. Consult the Non Cyclonic Design and Installation Guide for detailed information regarding fence types suitable for varying wind regions and terrain categories.

Suitability

SMARTASCREEN® can be installed in all regions of Australia except for the tropical cyclonic regions defined in AS/NZS 1170.2.2002 Structural Design Loads, Part 2: Wind Loads (See map Figure 4.2). Please refer to our cyclonic fencing range for use in these areas.

NCC of Australia Compliance

LYSAGHT® products comply with the National Construction Code of Australia (NCC).

Downloads

Brochures & Catalogues

LYSAGHT SMARTASCREEN® Fencing Brochure PDF(1 MB). Last updated 1 Jun 2021

LYSAGHT® Fencing Product Performance Warranty PDF(780.83 KB). Last updated 9 Feb 2023

User Guides & Manuals

Availability

New South Wales & ACT
Available
Northern Territory
Not Available
Queensland
Available
South Australia
Not Available
Tasmania
Available
Victoria
Available
Available
Filled
Available
Outlined
Not Available

Colour Range

STANDARD FENCING COLOUR RANGE

  1. Basalt®
  2. Bluegum®
  3. Domain®
  4. Dune®
  5. Evening Haze®
  6. Ironstone®
  7. Monument®
  8. Pale Eucalypt®
  9. Paperbark®
  10. Riversand®
  11. Shale Grey™
  12. Surfmist®
  13. Wilderness®
  14. Wollemi®
  15. Woodland Grey®

SECONDARY FENCING COLOUR RANGE

  1. Bushland®
  2. Cottage Green®
  3. Deep Ocean®
  4. Harvest®
  5. Jasper®
  6. Manor Red®
  7. Night Sky®
  8. Wallaby®
  9. Windspray®

EXTENDED FENCING COLOUR RANGE

  1. Estate®
  2. Hedge®

COLORBOND® steel Studio Library

COLORBOND® steel Studio enables you to browse over 200 COLORBOND® steel colours. Search by RGB or HEX colour values or DULUX or RAL colour names to return the closest match from over 200 available colours.

The COLORBOND® steel colour swatches shown have been reproduced to represent actual product colours and finish as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions and limitations of the printing process may affect colour tones and finish. All colours & finishes may not be available in all regions or for all profiles. To determine the most suitable material for your project, please contact your supplier or steel.com.au/Colorbond.

Pricing

Pricing for all our products varies based on availability and quantity.

Questions?

Phone (Mon-Fri, 9AM-5PM AEST/AEDT):

1800 641 417

100 Years Celebration

LYSAGHT® products have been made in Australia for 100 years.