Visit Lysaght.com

Other Lysaght Sites

Description

FORMFLOW® C90™ corners are the seamless corner solution for LYSAGHT CUSTOM ORB® clad buildings when combined in the LYSAGHT CUSTOMFLOW™ solution.

With a bend geometry perfectly matched to CUSTOM ORB® corrugated cladding, FORMFLOW® C90™ corners provide a structurally independent, no-gaps solution to the challenges of joining corrugated sheets end to end at building corners and other junctions.

In addition to delivering an elegant finished look, FORMFLOW® C90™ corners may also help deliver energy efficiency, maintenance, safety and installation benefits and can also improve fire resistance capabilities of a structure in some applications.

Technical Specifications

Schematic

Lengths

FORMFLOW® C90™ corners comprise a corrugated sheet with a 90° (+/- 5°) bend on one end. The ‘short leg’ (H) created by the bend is 180mm in length; the ‘long leg’ (L) is a minimum of 1000mm and a maximum of 8000mm.

Tolerance

Length: + 10 mm, - 10 mm
Cover Width: + 4 mm, - 4 mm

Material Specification

Next generation ZINCALUME® aluminium/zinc/magnesium alloy coated steel complies with AS 1397:2011 G550, AM125 (550 MPa minimum yield stress, 125g/m2 minimum coating mass).

COLORBOND® is pre-painted steel for exterior roofing and walling. The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/zinc/magnesium alloy-coated steel complying with AS 1397:2011 G550, AM100 (550Mpa minimum yield stress, 100g/m2 minimum coating mass).

COLORBOND® Metallic is pre-painted steel for superior aesthetic qualities displaying a metallic sheen.

COLORBOND® steel Matt is pre-painted steel for superior aesthetic qualities displaying a matt finish.

COLORBOND® Ultra is pre-painted steel for severe coastal or industrial environments (generally within about 100-200 metres of the source). The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/zinc/magnesium alloy-coated steel complying with AS 1397:2011 G550, AM150 (550Mpa minimum yield stress, 150g/m2 minimum coating mass).

Masses

Finish BMT Mass
(mm) kg/m kg/m2 m2/t
ZINCALUME® 0.42 3.26 4.28 234
COLORBOND® 0.42 3.32 4.35 230

Span Table

The maximum recommended support spacings are based on testing in accordance with AS1562.1-1992, AS4040.1-1992 and AS4040.2-1992.

Roof spans consider both resistance to wind pressure and light roof traffic (traffic arising from incidental maintenance).

Wall spans consider resistance to wind pressure only. To view full limit state wind pressure capacity tables please download FORMFLOW® C90™ Design & Installation Guide

Maximum Support Spacings (mm)
Types of Span BMT (mm)
0.42
Roofs
Single Span 700
End Span 900
Internal Span 1200
Unstiffened Eaves Overhang 200
Stiffened Eaves Overhang 300
Walls
Single Span 1800
End Span 2500
Internal Span 2700
Overhang 200

Capacity & Load Tables

The limit state win pressure capacity table can be viewed in the FORMFLOW® C90™ Design & Installation Guide.

Roof Drainage Capacity

The rainfall capacity table can be viewed in the FORMFLOW® C90™ Design & Installation Guide.

NCC of Australia Compliance

LYSAGHT® products comply with the National Construction Code of Australia (NCC).

Downloads

Brochures & Catalogues

LYSAGHT CUSTOMFLOW® Brochure PDF(1.2 MB). Last updated 7 May 2021

Availability

New South Wales & ACT
Not Available
Northern Territory
Not Available
Queensland
Not Available
South Australia
Not Available
Tasmania
Not Available
Victoria
Available
Not Available
Filled
Available
Outlined
Not Available

Colour Range

STANDARD COLOUR RANGE

  1. Basalt®
  2. Classic Cream™
  3. Cottage Green®
  4. Cove®
  5. Deep Ocean®
  6. Dune®
  7. Evening Haze®
  8. Gully®
  9. Ironstone®
  10. Jasper®
  11. Mangrove®
  12. Manor Red®
  13. Monument®
  14. Night Sky®
  15. Pale Eucalypt®
  16. Paperbark®
  17. Shale Grey™
  18. Surfmist®
  19. Terrain®
  20. Wallaby®
  21. Windspray®
  22. Woodland Grey®

Unpainted Steel Range

  1. ZINCALUME® steel

COLORBOND® steel Studio Library

COLORBOND® steel Studio enables you to browse over 200 COLORBOND® steel colours. Search by RGB or HEX colour values or DULUX or RAL colour names to return the closest match from over 200 available colours.

The COLORBOND® steel colour swatches shown have been reproduced to represent actual product colours and finish as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions and limitations of the printing process may affect colour tones and finish. All colours & finishes may not be available in all regions or for all profiles. To determine the most suitable material for your project, please contact your supplier or steel.com.au/Colorbond.

Pricing

Pricing for all our products varies based on availability and quantity.

Questions?

Phone (Mon-Fri, 9AM-5PM AEST/AEDT):

1800 641 417

100 Years Celebration

LYSAGHT® products have been made in Australia for 100 years.