PRODUCT INFORMATION TOO TECHNICAL?Visit Lysaght.com
With a semi-open design of horizontal slats, LYSAGHT LOUVRESCREEN® provides privacy whilst also allowing light and airflow into your property.
- Features angled horizontal slats made from COLORBOND® steel
- Available in 1500mm & 1800mm heights
- Rot and termite resistant whilst adding security and privacy
COLORBOND® pre-painted steel complying with AS/NZS 2728:2007. Next generation ZINCALUME® aluminium / zinc / magnesium alloy coated steel complying with AS1397-2011 G550, AM125 (550 MPa minimum yield stress, 125 g/m2 minimum coating mass).
The fence panel base metal thickness is 0.55mm.
The nominal heights of fences are 1500mm and 1800mm from top rail to bottom rail. The bottom rail should be nominally 50mm above ground level.
Standard panel widths are 1800mm from post to post.
CUSTOMSCREEN® can be installed in all regions of Australia except for the tropical cyclonic regions defined in AS/NZS 1170.2.2002 Structural Design Loads, Part 2: Wind Loads (See map Figure 4.2). Please refer to our cyclonic fencing range for use in these areas.
Made in Australia
All Lysaght products are proudly made in Australia from 100% Australian steel.
Brochures & Catalogues
LYSAGHT SLATSCREEN® and LYSAGHT LOUVRESCREEN™ Brochure PDF (1.3 MB). Last updated 13 Nov 2017
LYSAGHT® 10 Year Fencing Warranty PDF (0.8 MB). Last updated 13 Nov 2017
User Guides & Manuals
LYSAGHT SLATSCREEN® and LYSAGHT LOUVRESCREEN® Installation Guide PDF (2.2 MB). Last updated 20 Nov 2017
- New South Wales & ACT
- Northern Territory
- Not Available
- South Australia
- Western Australia
- Not Available
STANDARD FENCING COLOUR RANGE