Visit Lysaght.com

Other Lysaght Sites

Description

Mini-corrugated wall cladding suitable for use on interior and exterior applications. This subtle profile is a perfect complement to other LYSAGHT® roofing and walling claddings to provide a contrasting surface as an accent feature.

  • Perfect for decorative walls and ceilings
  • Suitable for flat and curved installations
  • Corrugations can run vertically or horizontally
  • Nominal cover width: 820mm (807mm in WA; 810mm in SA)

Technical Specifications

Schematic

MINI ORB® cover width in WA is 807mm; 810mm in SA.

Lengths

Sheets are supplied custom cut to length. Minimum and maximum lengths apply. Please contact your nearest LYSAGHT® office for your region for more information.

Tolerance

Length: +5mm, -5mm
Width: +2mm, -2mm

Material Specification

Next generation ZINCALUME® aluminium/zinc/ magnesium alloy coated steel complies with AS1397:2011 G550, AM125 (550 MPa minimum yield stress, 125 g/m2 minimum coating mass).

COLORBOND® steel is prepainted steel for exterior roofing and walling. It is the most widely used. The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/zinc alloy-coated steel complying with AS 1397:2011. Minimum yield strengths are G550 (550MPa), or G300 (300MPa) depending on profile. Minimum coating mass is AM100 (100g/m2).

COLORBOND® Metallic steel is prepainted steel for superior aesthetic qualities displaying a metallic sheen.

COLORBOND® Ultra steel is prepainted steel for severe coastal or industrial environments (generally within about 100-200 metres of the source). The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/ zinc alloy-coated steel complying with AS 1397:2011. Minimum coating mass is AM150 (150g/m2).

SuperDura™ Stainless steel is pre-painted steel and is used for severe and coastal environments. The painting complies with AS/NZS 2728:2013 and the steel base is a stainless steel complying with AISI/ASTM Type 430; UNS No. S43000.

Masses

BMT 0.42mm: 4.04kg/m2
BMT 0.48mm: 4.58kg/m2

Span Table

Span Tables and limit state wind pressure capacity table can be viewed in the LYSAGHT® Walling Solutions or LYSAGHT® MINI-ORB WA brochure.

LYSAGHT® Walling Solutions Guide
LYSAGHT MINI ORB® WA Design and Installation Guide

This information is suitable for use only in areas where a tropical cyclone is unlikely to occur as defined in AS1170.2-2002.

NCC of Australia Compliance

LYSAGHT® products comply with the National Construction Code of Australia (NCC).

Downloads

Brochures & Catalogues

LYSAGHT® Build On Inspiration - Design in Steel PDF(10.16 MB). Last updated 27 Jul 2021

LYSAGHT® Walling Brochure PDF(4.42 MB). Last updated 12 Jun 2020

Availability

New South Wales & ACT
Available
Northern Territory
Available
Queensland
Available
South Australia
Available
Tasmania
Available
Victoria
Available
Available
Filled
Available
Outlined
Not Available

Colour Range

STANDARD COLOUR RANGE

  1. Basalt®
  2. Classic Cream™
  3. Cottage Green®
  4. Cove®
  5. Deep Ocean®
  6. Dune®
  7. Evening Haze®
  8. Gully®
  9. Ironstone®
  10. Jasper®
  11. Mangrove®
  12. Manor Red®
  13. Monument®
  14. Night Sky®
  15. Pale Eucalypt®
  16. Paperbark®
  17. Shale Grey™
  18. Surfmist®
  19. Terrain®
  20. Wallaby®
  21. Windspray®
  22. Woodland Grey®

MATT COLOUR RANGE

  1. Basalt®
  2. Dune®
  3. Monument®
  4. Shale Grey™
  5. Surfmist®

METALLIC COLOUR RANGE

  1. Aries™
  2. Astro™
  3. Celestian™
  4. Cosmic™
  5. Galactic™
  6. Rhea™

Unpainted Steel Range

  1. ZINCALUME® steel

COLORBOND® steel Studio Library

COLORBOND® steel Studio enables you to browse over 200 COLORBOND® steel colours. Search by RGB or HEX colour values or DULUX or RAL colour names to return the closest match from over 200 available colours.

The COLORBOND® steel colour swatches shown have been reproduced to represent actual product colours and finish as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions and limitations of the printing process may affect colour tones and finish. All colours & finishes may not be available in all regions or for all profiles. To determine the most suitable material for your project, please contact your supplier or steel.com.au/Colorbond.

Pricing

Pricing for all our products varies based on availability and quantity.

Questions?

Phone (Mon-Fri, 9AM-5PM AEST/AEDT):

1800 641 417

100 Years Celebration

LYSAGHT® products have been made in Australia for 100 years.