PRODUCT INFORMATION TOO TECHNICAL?Visit Lysaght.com
A subtle fluted wall cladding profile ideal for applications where a near flat surface are required. The longitudinal flutes provide rigidity along the length of the sheet while retaining full flexibility across the width.
- Suitable for use as eaves on a residential building
- Can be used flat or curved
- Flutes can run vertically or horizontally
Nominal cover width: 850mm
Sheets are supplied custom cut to length. Minimum and maximum lengths apply. Please contact your nearest LYSAGHT® office for your region for more information.
Length: +0mm, -15mm
Width: +2mm, -2mm
Next generation ZINCALUME® aluminium/zinc/ magnesium alloy coated steel complies with AS1397:2011 G550, AM125 (550 MPa minimum yield stress, 125 g/m2 minimum coating mass).
COLORBOND® steel is prepainted steel for exterior roofing and walling. It is the most widely used. The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/zinc alloy-coated steel complying with AS 1397:2011. Minimum yield strengths are G550 (550MPa), or G300 (300MPa) depending on profile. Minimum coating mass is AM100 (100g/m2).
COLORBOND® Metallic steel is prepainted steel for superior aesthetic qualities displaying a metallic sheen.
COLORBOND® Ultra steel is prepainted steel for severe coastal or industrial environments (generally within about 100-200 metres of the source). The painting complies with AS/NZS 2728:2013 and the steel base is an aluminium/ zinc alloy-coated steel complying with AS 1397:2011. Minimum coating mass is AM150 (150g/m2).
SuperDura™ Stainless steel is pre-painted steel and is used for severe and coastal environments. The painting complies with AS/NZS 2728:2013 and the steel base is a stainless steel complying with AISI/ASTM Type 430; UNS No. S43000.
BMT 0.35mm: 3.29 kg/m2
BMT 0.42mm: 3.90 kg/m2
Span Tables and limit state wind pressure capacity table can be viewed in the LYSAGHT® Walling Solutions Guide This information is suitable for use only in areas where a tropical cyclone is unlikely to occur as defined in AS1170.2-2002.
Brochures & Catalogues
User Guides & Manuals
LYSAGHT® Walling Solutions Design and Installation Guide PDF(2.34 MB). Last updated 9 Apr 2019
LYSAGHT® Flashing Guide - Architectural Detailing Manual PDF(4.84 MB). Last updated 15 Aug 2019
LYSAGHT® Condensation Control in Australian Buildings constructed with LYSAGHT® claddings PDF(4.67 MB). Last updated 26 Jul 2021
- New South Wales & ACT
- Northern Territory
- South Australia
- Western Australia
- Not Available
STANDARD COLOUR RANGE
Unpainted Steel Range
COLORBOND® steel Studio Library
COLORBOND® steel Studio enables you to browse over 200 COLORBOND® steel colours. Search by RGB or HEX colour values or DULUX or RAL colour names to return the closest match from over 200 available colours.
The COLORBOND® steel colour swatches shown have been reproduced to represent actual product colours and finish as accurately as possible. However, we recommend checking your chosen colour against an actual sample of the product before purchasing, as varying light conditions and limitations of the printing process may affect colour tones and finish. All colours & finishes may not be available in all regions or for all profiles. To determine the most suitable material for your project, please contact your supplier or steel.com.au/Colorbond.